HP Integrity BL890c - i2 Server Manual page 22

Figure 1-10 Adding uplinks to an existing vNet (vNet-PROD).
Note: The Port Status and Connected to information. If the connected switch supports LLDP, the connected to
information should be displayed as below
Figure 1-11 Link aggregation confirmed – Bay 1.
Note: All connections within an active/active LACP group will have the same LAG ID. To view this, go to the
Interconnect bay and view Uplink Port Information. If you are having trouble establishing an active/active
connection, confirm the LAG ID.
Scenario 1:1 – Simple vNet with Active/Standby Uplinks and Optional Link Aggregation 802.3ad (LACP) - Windows 22