HP Integrity BL890c - i2 Server Manual page 148
Virtual connect ethernet cookbook:single and multi enclosure domain (stacked) scenarios
Hide thumbs
Also See for Integrity BL890c - i2 Server:
- Software manual (44 pages) ,
- Quickspecs (34 pages) ,
- Release note (25 pages)
Table of Contents
Advertisement
Defining a Server Profile via CLI
The following command(s) can be copied and pasted into an SSH based CLI session with Virtual Connect
# Create Server Profile Server-1
add profile Server-1 –nodefaultenetconn
add enet-connection Server-1 pxe=Enabled Network=PROD-A-1 SpeedType=Custom Speed=500
add enet-connection Server-1 pxe=Disabled Network=PROD-A-2 SpeedType=Custom Speed=500
add enet-connection Server-1 pxe=Disabled Network=PROD-B-1 SpeedType=Custom
Speed=2500
add enet-connection Server-1 pxe=Disabled Network=PROD-B-2 SpeedType=Custom
Speed=2500
add enet-connection Server-1 pxe=Disabled
add server-port-map Server-1:5 PROD-C-1 VLanId=103
add server-port-map Server-1:5 PROD-D-1 VLanId=104
add server-port-map Server-1:5 PROD-E-1 VLanId=105
add enet-connection Server-1 pxe=Disabled
add server-port-map Server-1:6 PROD-C-2 VLanId=103
add server-port-map Server-1:6 PROD-D-2 VLanId=104
add server-port-map Server-1:6 PROD-E-2 VLanId=105
Assign profile Server-1 enc0:1
Figure 2-52 Define a Server Profile with 6 NICs.
Scenario 2:3 - Flex-10 - VLAN Tagging (802.1Q) with Multiple Shared Uplink Sets (SUS) and Mapped VLANs - ESX 4 148
Advertisement
Table of Contents
