HP Integrity BL890c - i2 Server Manual page 138

Assigning a Virtualization Manager to a Network/VLAN
Run the Hyper-V Manager and select HP Insight Virtualization Manager software that requires a network
connection to be made. Select Setting for that Virtualization Manager, click the Network Adapter, under
the Network drop down box, select the appropriate VLAN (VLAN 102), enable virtual LAN identification
and enter the appropriate VLAN ID for this system and apply the settings.
Figure 2-44 Configure Virtualization Manager network settings.
Once this Virtualization Manager is powered on, the management NIC team would be connected to the
management network through NIC 1 & 2. The Production VLANs network will present the Virtualization
Manager with a connection that the VLAN as configured. Frames will be handed to the Virtualization
Manager without tags. As the Production VLANs network is based on a NIC team, as is the management
connection to this server, in the event of a module or uplink failure, the NIC team would manage path fail-
over to the alternate NIC.
Scenario 2:2 - Flex-10 - VLAN Tagging (802.1Q) with Multiple Shared Uplink Sets (SUS) and Mapped VLANs - Windows 2008
Hyper-V 138