Economy Switch; Toner Save Mode; Power Save Mode - Brother HL-2060 User Manual

ECONOMY Switch

TONER SAVE MODE

You can turn on or off the toner save mode as follows:
Display Message
TONER SAVE=OFF
TONER SAVE=ON

POWER SAVE MODE

You can turn on or off the power save mode as follows:
Display Message
POWER SAVE=ON
POWER SAVE=OFF
1. When you turn on the power save mode, the display shows the
following message:
2. When you press the SET switch, the display show this message:
You need to set the time out for the power save mode from 1 to 99
minutes with the
out is the duration after which the fixing assembly of the print engine is
turned off ("SLEEP") to save power.
When the power save mode is turned on, the printer turns on the fixing
assembly again after it receives data from the computer. Since the fixing
assembly must reach the specified high temperature, it takes a little longer
time to start printing the first page.
Toner Save Mode
Turn off the toner save mode.
(Factory setting)
Turn on the toner save mode. The amount
of toner on the paper decreases and the
printed image may look light gray.
Power Save Mode
Turn on the power save mode. The fixing
assembly of the print engine is turned off
after the specified time to save power.
(Factory setting)
Turn off the power save mode. The fixing
assembly of the print engine is always
powered on to keep its temperature at the
specified level.
TIME OUT
TIME OUT=30m
or switch: factory setting =30 minutes. The time
CHAPTER 4 CONTROL PANEL
*
4–73