Rj-45 Connectors; Rj-48C Connectors - Juniper ERX - RELEASE 11.1.X HARDWARE GUIDE 03-23-2010 Hardware Manual

CAUTION: Do not terminate HSSI connections with SCSI connectors. Although SCSI
connectors look very similar to HSSI connectors, using SCSI connectors on HSSI
connections can lead to data loss.
Figure 30: HSSI I/O Module with 50-Pin HSSI Connector

RJ-45 Connectors

When inserting an RJ-45 connector, be sure it clicks into the port.
Figure 31: I/O Module with RJ-45 Connector

RJ-48C Connectors

When inserting an RJ-48C connector, be sure it clicks into the port.
Chapter 5: Cabling ERX Routers
59
Cabling I/O Modules