Erx310 Broadband Specifications - Juniper ERX - RELEASE 11.1.X HARDWARE GUIDE 03-23-2010 Hardware Manual

Table 16: ERX7xx Models Specifications (continued)
Category
Telecommunications
Certification

ERX310 Broadband Specifications

Table 17: ERX310 Router Specifications
Category
Weight: DC model
Chassis only
Chassis, fully configured
Weight: AC model
Chassis with single power supply
Chassis with dual power supply
Chassis with single power supply,
fully configured
Chassis with dual power supply, fully
configured
Dimensions
Environmental Requirements
Ambient operating temperature
Ambient operating humidity
Specification
ACA TS 016-1997
CTR13 – Commission Decision of 9 July 1997 on a common technical regulation for
attachment requirements for terminal equipment interface for connection to 2048 kbit/s
digital structured ONP leased lines: 97/521/EC – OJ No. L215 Vol. 40, August 1997
CTR24 – Commission Decision of 9 September 1997 on a common technical regulation
for attachment requirements for terminal equipment interface for connection to 34
Mbit/s digital unstructured and structured leased lines: 97/639/EC – OJ No. L271 Vol.
40, 3 October 1997
FCC PART 68
IECS-003 Issue 3 Class A
PD7024 – Essential requirements for terminal equipment intended for connection to
unstructured digital leased circuits of the public telecommunications network using a
CCITT recommendation G,703 interface at a rate of 2048 kbit/s with a 75 ohm
unbalanced presentation, 1994
RTTE Directive (1999/5/EEC)
Specification
Weights are approximate.
25.5 lb (11.57 kg)
36 lb (16.33 kg)
Weights are approximate.
27.5 lb (12.47 kg)
31.5 lb (14.29 kg)
38 lb (17.24 kg)
42 lb (19.05 kg)
5.2 (H) x 19 (W) x 16 (D) inches; 13.21 x 48.26 x 40.64 cm
NEBS GR-63-CORE compliant
Long term: 41° to 104° F (5° to 40° C)
Short term: 23° to 122° F (–5° to 50° C)
Long term: 5% to 85% (noncondensing)
Short term: 5% to 95% (noncondensing)
Appendix A: System Specifications
ERX310 Broadband Specifications
113