Juniper ERX - RELEASE 11.1.X HARDWARE GUIDE 03-23-2010 Hardware Manual page 110

ERX 11.1.x Hardware Guide
6.
CAUTION: Do not overtighten the screws.
7.
8.
9.
Figure 48: Power Input Module for ERX14xx Models
94
Replacing a Power Input Module
Install the new PIM and tighten the screws.
Reconnect the power cables and grounding cables. See "Cabling the Router for
Power" on page 53
Replace the clear plastic guard.
Power up the router. See "Powering Up ERX Routers" on page 65.