Slot Groups For The Erx7Xx Models; Combinations Of Line Modules In Slot Groups - Juniper ERX - RELEASE 11.1.X HARDWARE GUIDE 03-23-2010 Hardware Manual

Figure 17: ERX1410 Slot Groups

Slot Groups for the ERX7xx Models

A slot group in an ERX7xx model comprises one slot or two adjacent slots. The groups
for an ERX7xx model consist of the following slots (Figure 18 on page 33):
Slots 0 and 1 are reserved for the SRP modules.
Figure 18: ERX7xx Model Slot Groups

Combinations of Line Modules In Slot Groups

For information about combinations of line modules in slot groups, see JUNOSe
System Basics Configuration Guide, Chapter 6, Managing Modules.
Slot group 1 Slots 2 and 3
Slot group 2 Slot 4
Slot group 3 Slot 5
Slot group 4 Slot 6
Chapter 4: Installing Modules
33
Overview