Cabling I/O Modules; Bnc Connectors; Hssi Connectors - Juniper ERX - RELEASE 11.1.X HARDWARE GUIDE 03-23-2010 Hardware Manual

ERX 11.1.x Hardware Guide
3.
Figure 28: ERX310 Router, Rear View (AC model)

Cabling I/O Modules

This section illustrates the common connector types used with ERX I/O modules.
For information about the connectors on the different line modules, see the ERX
Module Guide.

BNC Connectors

Figure 29: I/O Module with BNCs

HSSI Connectors

The HSSI I/O module uses a standard 50-pin HSSI connector.
58

Cabling I/O Modules

Repeat Steps 1–2 for the other power input module, if needed.