Cabling Rj-45 Connectors - Juniper ERX-1410 Installation And User Manual

Cabling RJ-45 Connectors

To cable I/O modules with HSSI connectors:
1
Insert the HSSI connector into the selected port.
2
Terminate the other end in the appropriate network connection.
3
Repeat steps 1 and 2 for the other ports.
Figure 4-5 HSSI I/O module with 50-pin HSSI connector
To cable I/O modules with RJ-45 connectors:
1
Insert the RJ-45 connector into the selected port.
2
Terminate the other end in the appropriate network connection.
3
Repeat steps 1 and 2 for the other ports.
Cabling I/O Modules
ERX Edge Routers
HSSI-3
I/O
4-11