Table of Contents
Advertisement
but the computer is behind a proxy server. Before downloading updates, send your
username and password to the proxy server. To do so, use the commands:
rug set proxy-url url_path
rug set proxy-username name
rug set proxy-password password
Replace url_path with the name of your proxy server. Replace name with your
username. Replace password with your password.
7.12.4 For More Information
For more information about updating from the command line, enter rug --help or
see the rug(1) man page. The --help option is also available for all rug commands.
If, for example, you want to read help for rug update, enter rug update --help.
7.13 SaX2
Configure the graphical environment of your system with Hardware → Graphics Card
and Monitor. This opens the SUSE Advanced X11 Configuration interface (SaX2),
where you can configure devices such as your mouse, keyboard, or display devices.
This interface can also accessed from the main menu by clicking System → Configura-
tion → SaX2.
7.13.1 Card and Monitor Properties
Adjust the settings for your graphics card and display device in Card and Monitor
Properties. If you have more than one graphics card installed, each device is shown in
a separate dialog reachable by a tab. At the top of the dialog, see the current settings
for the selected graphics card and the monitor that is attached to it. If more than one
screen can be connected to the card (dual head), the monitor on the primary output is
shown. Normally, the card and display device are detected automatically by the system
during installation. However, you can tune many parameters manually or even change
the display device completely.
190
Installation and Administration
Advertisement
Table of Contents
Troubleshooting
