Displaying Mac Table Information - HP procurve 8100fl series Management And Configuration Manual

Spanning-Tree Operation
MSTP Show Commands and Troubleshooting
9-32
debug spanning-tree clear
debug spanning-tree flush
debug spanning-tree set
debug spanning-tree show
debug spanning-tree tc

Displaying MAC Table Information

The show bridge mac table command displays the master MAC table
information for the switch.
Changing the MAC age time. To set the MAC table aging timer, enter the
following command:
ProCurve(config)#bridge mac-table aging-time <age>
where age is the timer value in seconds
Logs information about clear parameters.
Logs for displaying flush-related information.
Logs information about set parameters.
Logs information about show parameters.
Logs information about state changes on individual
ports.