Displaying Rmon Event Logs; Rmon Configuration Example - HP 1910 User Manual

Field
UndersizePkts
OversizePkts
Fragments
Jabbers
Collisions
Utilization

Displaying RMON event logs

Select Device > RMON from the navigation tree.
1.
Click the Log tab.
2.
The page displaying log information appears.
Figure 94 Log tab
View log information for all event entries.
3.
In this example, event 1 has generated one log, which is triggered because the alarm value
(11779194) exceeds the rising threshold (10000000). The sampling type is absolute.

RMON configuration example

Network requirements
As shown in
RMON Ethernet statistics table to gather statistics on GigabitEthernet 1/0/1 with the sampling interval
being ten seconds, and perform corresponding configurations so that the system will log the event when
the number of bytes received on the interface more than 1000 or less than 100.
Description
Number of undersize packets received during the sampling period,
corresponding to the MIB node etherHistoryUndersizePkts.
Number of oversize packets received during the sampling period, corresponding
to the MIB node etherHistoryOversizePkts.
Number of fragments received during the sampling period, corresponding to the
MIB node etherHistoryFragments.
Number of jabbers received during the sampling period (Support for the field
depends on the device model.), corresponding to the MIB node
etherHistoryJabbers.
Number of collision packets received during the sampling period, corresponding
to the MIB node etherHistoryCollisions.
Bandwidth utilization during the sampling period, corresponding to the MIB node
etherHistoryUtilization.
Figure 95, Agent is connected to a remote NMS across the Internet. Create an entry in the
65