Table of Contents
Advertisement
Table 140
RIP Interface Configuration Menu options
Command
key
enable
disable
cur
RIP Route Redistribution configuration
Command: /cfg/l3/rip/redist fixed|static|ospf|eospf
[RIP Redistribute Fixed
The following table describes the RIP Route Redistribute Menu options.
Table 141
RIP Redistribute Configuration Menu options
Command
add <1-32> <1-32>|all
remove <1-32> <1-32>|all
export <1-15>|none
cur
Description
Configures the authentication key password.
Enables this RIP interface.
Disables this RIP interface.
Displays the current RIP configuration.
add
- Add rmap into route redistribution list
rem
- Remove rmap from route redistribution list
export
- Export all routes of this protocol
cur
- Display current route-maps added
Description
Adds selected routing maps to the RIP route redistribution list. To add all
the 32 route maps, enter all. To add specific route maps, enter routing
map numbers one per line, NULL at the end.
This option adds a route map to the route redistribution list. The routes of
the redistribution protocol matched by the route maps in the route
redistribution list will be redistributed.
Removes the route map from the RIP route redistribution list.
Removes routing maps from the list. To remove all 32 route maps, enter
all. To remove specific route maps, enter routing map numbers one per
line, NULL at end.
Exports the routes of this protocol in which the metric and metric type are
specified. To remove a previous configuration and stop exporting the
routes of the protocol, enter none.
Displays the current RIP route redistribute configuration.
Menu]
Configuration Menu 167
Advertisement
Table of Contents
