Do-It-Yourself Maintenance - Thermador PRD48JDSGU Use And Care Manual

Do-It-Yourself Maintenance

Replacing the Light Bulb
in the Main Oven
CAUTION:
Before replacing the light bulb, be certain the
Oven Light Switch is in the OFF position. Let
bulb and cover cool completely before touch-
ing. If the light bulb glass comes loose from
the base, turn the power to the oven OFF at
the circuit breaker panel before attempting to
remove the bulb base from the socket.
Replace only with a recommended light bulb designed for
appliance oven use. DO NOT USE a standard household
light bulb in any oven. Call THERMADOR® Customer Care
Center at 1-800-735-4328 or your nearest THERMADOR®
dealer to determine the proper replacement bulb for your
range. You will need to know your range's serial number.
To Replace the Light Bulb:
1. Make sure that oven light switch is in the OFF position.
2. Remove the light cover:
With a flat-blade screwdriver in one hand, use the
screwdriver as a small wedge to gently pry apart the
glass cover from the metal housing and hold the glass
in the other hand as it releases from the housing.
3. Remove the burned-out bulb. Replace it with a
recommended appliance light bulb only. DO NOT touch
bulb with fingers. Follow the bulb manufacturer's
instructions.
4. Replace the glass cover by aligning it with the housing
and pressing on both ends of the glass, with equal
force, until the cover snaps into position. Avoid
applying excessive force on the glass.
Replacing the Light Bulb
in the Steam Oven
Heat-resistant 230V / 25 Watt halogen bulbs with seals can
be purchased through retail stores or customer service.
purchasing through customer service provide the appliance
model and serial numbers.
English 86
WARNING:
• Make sure the appliance and lights are
cool and power to the appliance has been
turned off before replacing the light
bulb(s). Failure to do so could result in
electrical shock or burns.
• The covers must be in place when using
the appliance.
• The covers serve to protect the light bulb
from breaking.
• The covers are made of glass. Handle
carefully to avoid breaking. Broken glass
could cause an injury.
• The light socket is live when the door is
open.
Always use a dry cloth to remove the halogen bulb from its
packaging, otherwise the life of the bulb will be shortened.
1. Turn off power to the appliance at the main power
supply (fuse or breaker box) or unplug the power cord.
2. Turn the cover to the left to remove.
3. Remove the bulb and replace with the same type of
bulb.
4. Slip the new seals and tension ring onto the glass
cover.
5. Screw the glass cover with seals back on.
6. Reconnect the appliance to power and reset the clock.
Never operate the appliance without the glass cover or
seals.
Replacing the Glass Cover or Seals
Damaged glass covers or seals must be replaced. Provide
customer service with the appliance model and serial
numbers.