Thermador PRD48JDSGU Use And Care Manual page 57

Temperature Setting for Each Cooking Mode
Different modes have different possible minimum and maximum temperatures. The following table describes the limits on
setting the temperature ranges for each mode (except for EASYCOOK, described in a later section):
Cooking Minimum
Mode Temperature
°
TRUE
100 F
CONVEC
°
REHEAT
210 F (100
°
DEFROST
110 F (45
°
SLOW COOK
140 F (60
°
PROOF
85 F (30
°
STEAM/
250 F (120
CONVEC
°
STEAM
212 F (100
Changing the Temperature during Operation
CHANGING DURING PREHEAT: If the new temperature
you choose is higher than the current one, the oven will
resume preheating, recalculating the number of preheat
bars to show progress to the new temperature.
If the new temperature is lower than the current one (or
within 95% of it), the oven will go directly to cooking. The
"Cook Timer" and the remaining countdown time will be
displayed. For foods that could be damaged by the higher
original cooking temperature, wait a few minutes before
placing the dish in the oven, and reset the Cook Timer if
necessary.
CHANGING AFTER PREHEAT: If you change the
temperature once the cooking temperature has been
reached, the oven will ramp the interior temperature up or
down to the new temperature. The cook timer will continue
counting down without being affected.
If the food you are placing in the oven at the lower
temperature could be damaged by a higher original
temperature, wait a few minutes for the oven to cool down
to the lower temperature before adding the dish. Reset the
Cook Timer as necessary.
Maximum
Temperature
( ° ° °
40 C) 450 F (230 C)
° ° °
C) 360 F (180 C)
° ° ( °
C) 110 F 45 C)
° ° °
C) 250 F (120 C)
° ° °
C) 85 F (30 C)
° ° °
C) 450 F (230 C)
° ° °
C) 212 F (100 C)
Second Line of
SELECT
TEMPERATURE
Display Will
Show:
°
TRUE CONVEC can use the full range of
0
oven temperatures
°
0 If you rotate the knob below 225
the display will show "210
If you rotate it higher than 350
the display will show "360
° °
Cannot use the knob
110 F (45 C)
°
0 If you rotate the knob below 150
the display will show "140
rotate it higher than 250
display will show "250
° °
Cannot use the knob
85 F (30 C)
°
0 If you rotate the knob below 250
the display will show "250
° °
Cannot use the knob
212 F (100 C)
Changing the Cooking Time during Operation
1. Press CANCEL. The display will show CANCEL COOK
TIMER.
2. Press ENTER to cancel the mode.
3. Press ENTER again to return to the main menu.
4. Using the "+/–" buttons, scroll to COOK TIMER.
5. Press ENTER to get the blinking (0:00).
6. Using the "+/–" buttons, input the new cooking time.
7. Press ENTER to restart the cook timer.
Canceling the Mode
To cancel a cooking mode, press the CANCEL button. A
prompt will appear asking if you want to cancel the mode
(e.g., CANCEL STEAM/CONVEC) on the first line of the
display screen.
If the oven is preheating, the preheat temperature will show
on the second line. If the oven is past preheat, "Cook
Timer" will display on the first line, and the countdown time
on the second.
To stop the operation, press ENTER. The display screen
will go blank. Turn the Mode Selector Ring to OFF.
Notes on Using the
Temperature Control Knob
°
°
F (100
°
F (180
°
F (182
°
° °
F (60
° °
F (120
° °
F (120 C) Max".
°
°
F (120
°
F (105 C),
°
C) Min".
°
C),
°
C) Max".
°
F (65 C),
C)". If you
C), the
°
F (120 C),
°
C) Max".
English 53