PART/MATERIAL
Warming Drawer interior/Polished
stainless steel
Warming Drawer/Painted surfaces
Warming Drawer Exterior frame/
Brushed stainless steel
Warming Drawer Control
Surface Spill Trays/Trim Strips
Porcelain Enamel (gloss finish)
SUGGESTED
CLEANERS
•
Use dish detergent. Wash, rinse
well, and dry. For hard water spots or
scale, use white vinegar. Apply with
a sponge or cloth, rinse, and dry.
•
Heat discoloration/corrosion: Clean
with Bar Keeper's Friend® sprinkled
on a wet sponge or wet cloth and
applied to the wet stainless steel
surface. Rub gently and evenly in the
direction of the grain. Rinse and dry.
•
Use hot soapy water or mild cleaners
such as Fantastik® or Formula
409®. Wash, rinse well, and dry.
Avoid using abrasive cleaning
agents, steel wool pads, and oven
cleaners.
•
Always wipe or rub in the direction of
the grain. Clean with a soapy
sponge, then rinse and dry, or wipe
with Fantastik® or Formula 409®
sprayed on a paper towel.
•
Protect and polish with Stainless
Steel Magic® and a soft cloth.
Remove water spots with a cloth
dampened with white vinegar.
•
Clean with hot soapy water or apply
Fantastik® or Formula 409® to a
clean sponge or paper towel and
wipe clean. Avoid using abrasive
cleaners and scrubbing pads.
•
A cleaner such as Soft Scrub® may
be used. Apply with a damp sponge
or cloth according to the
manufacturer's instructions. Rinse
thoroughly and wipe dry with a soft
cloth.
•
If cleaners such as Bar Keeper's
Friend®, Bon-ami®, Comet® or
Ajax® are used, apply with a damp
sponge or cloth according to the
manufacturer's directions. Rub
lightly as these cleansers may
scratch the finish. Rinse thoroughly
and wipe dry with a soft cloth.
•
For burned on foods, soap filled fiber
or steel wool pads such as S.O.S.®
or Brillo® may be used. Dampen the
pad and rub gently. Care must be
taken as these may scratch the
finish. Rinse thoroughly and wipe dry
with a soft cloth.
IMPORTANT
REMINDERS
•
None
•
None
•
None
•
None
•
None
English 83