Cleaning The Rack Rail Frames - Thermador PRD48JDSGU Use And Care Manual

Pro grand steam range
Hide thumbs Also See for PRD48JDSGU:
Table of Contents

Advertisement

Descaling Phase
1. Using only the descaling tablets recommended for this
oven (BSH part number 573828; obtain from your
retailer or order from http://www.thermador-eshop.com),
mix 32 oz. (1 quart or 0.95 liter) of water with a packet of
powder descaler to produce the descaling solution.
2. Empty the water tank and refill it with the descaling
solution. On the display, under the SETTINGS menu,
scroll with the "+/–" buttons to DESCALE and press
"ENTER". The display will then show START
DESCALE? YES".
Note:
Toggling with the "+/–" buttons gives the option START
DESCALE? NO. If you press "ENTER" when the display
shows START DESCALE? NO, the display returns to the
previous menu, showing DESCALE under the SETTINGS
menu.
3. Press "ENTER" to begin descaling. The display will
show EXPOSURE PHASE on the first line and 10:00
on the second line, and the countdown to 0:00 begins.
At this point DESCALE PHASE is displayed, and with a
time of 20 minutes.
At the end of the descaling phase, the countdown is
suspended and a beep will sound. The display will show
CLEAN DISH, FILL TANK on the first line and AND WIPE
OUT OVEN on the second line.
First Rinse Cycle
1. Remove the water tank and wash it out thoroughly, fill it
with water and slide it back in.
2. Using the cleaning sponge provided with your range (or
a comparable soft cloth or sponge), wipe any water out
of the evaporator dish and wipe out the oven.
Thoroughly wash out the cleaning sponge.
3. The display will now show PRESS ENTER BUTTON.
Press "ENTER" to start the first rinse cycle. The
display will show 1ST RINSE on the first line. The
countdown will resume.
4. After 20 seconds, a beep will signal the end of the first
rinsing cycle. The display will show CLEAN DISH on
the first line and PRESS ENTER BUTTON on the
second line.
5. Using the cleaning sponge, wipe any water out of the
evaporator dish.
Second Rinse Cycle
1. Press "ENTER" to start the second rinse cycle. The
display will show 2ND RINSE on the first line. The
countdown will resume again.
2. After 20 seconds, a beep will signal the end of
DESCALE. The display will show DESCALE
FINISHED on the first line and CLEAN DISH on the
second line.
3. Using the cleaning sponge, wipe any water out of the
evaporator dish and wipe out the oven. Thoroughly
rinse out the cleaning sponge.
4. Using a soft cloth, dry the oven cavity.

Cleaning the Rack Rail Frames

The rack rail frames can be removed for cleaning.
1
1
1
1
Pull the rack rail frame toward you and remove. Use
dishwashing soap and a kitchen sponge or brush to clean
the rack rail frames. The rack rail frames can also be
washed in the dishwasher.
Installing the Rack Rail Frames
Hang the back and front parts of the frame and then push it
back until it locks into place.
Each rack rail frame only fits on one side.
2
2
2
2
English 89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents