Thermador PRD48JDSGU Use And Care Manual page 61

Starting Cooking
In EASYCOOK programs, the rack location, baking pan
type, and cooking times have been pre-selected for the
food type and weight you have chosen.
7. Press ENTER again. The display will show the rack
level (levels 1 – 3) and specific ovenware/accessories
that should be used.
8. Press ENTER again. The display will show "Cook
Timer" on the first line and the automatic cooking time
for the particular choice of food on the second line.
9. Press ENTER and the oven will begin preheating.
The preheat bars, 1 bar up to 4, will display on the first
line and the current oven temperature on the second.
Once the oven reaches 90 – 95% of the pre-selected
temperature, the cook time countdown will be activated.
During Cooking
After preheat, the first line of the display will show the
specific cooking mode being used to cook the selected
food and the automatic temperature for that program (for
example, "Steam - 212°"). The automatic cooking time will
be on the second line.
> >
K i S t
t c e a
C o 2 1
m h e
2 ° o k
T i
E N E N
T E T E
R R
– –
The cook timer will now begin counting down from that
automatic time to 0:00 in the same manner as all the other
cooking cycles.
n
T i
m e
m e
r
r
+ +
C A C A
N C N C
E L E L
At the End of an EasyCook Program
When the cook timer reaches 0:00, the EasyCook program
will end. The display will beep to signal the end of the
cooking time.
The display will show "Cook Time" on the first line and
"Finished" on the second line and beep until you turn the
Mode Selector Ring or the Temperature Control Knob to
OFF.
Pressing the CANCEL button will also disable the buzzer
even if the oven has not been turned to OFF.
If 30 minutes passes with no further action to stop the timer
beep or turn the oven off, the beep will stop and the display
will go blank.
Canceling the Program during Operation
While an EasyCook mode is running, if you press CANCEL,
the display prompt will read "Cancel EasyCook?" If the oven
is still preheating, the preheat temperature will display on the
second line. If the oven has reached cooking temperature,
the countdown time will display on the second line.
To stop the operation, press ENTER. The screen will go
blank. Turn the Mode Selector Ring to OFF.
To continue cooking, press CANCEL again. If the oven was
3 0 3 0
in preheat, heating will resume and the preheating bars will
2 5 2 5 show on the display. If the oven was past preheat, then
0 0
"Cook Timer" and the countdown time will continue to
2 0 2 0
display.
0 0
1 0 1 0
0 0
English 57