Phaser; Tremolo; Panner - DigiTech RP200 User Manual

Phaser (PHaseR)
A phaser splits the incoming signal, and then changes the phasing of the signal.This signal is then
taken in and out of phase and mixed back in with the original signal. As the phasing changes,
different frequencies get canceled resulting in a warm sort of twisting sound.
Amount - The Parameter 2 knob simultaneously adjusts the rate (Speed) and intensity
(Depth) of the Effect. Ranges from 1 to 99.
Level - The Parameter 3 knob controls the mix level of the Effect. Ranges from 0 to 99.
Tremolo (TREMLO)
A Tremolo effect modulates the volume of the signal at an even rate.
Amount - The Parameter 2 knob adjusts the rate (Speed) at which the volume modulates.
Ranges from 1 to 99.
Level - The Parameter 3 knob adjusts the intensity (Depth) of the modulating volume. Ranges
from 0 to 99.
Panner (PANNER)
An Auto Panner modulates the sound from left to right at an even rate.
Amount - The Parameter 2 knob adjusts the rate (Speed) at which the signal pans from side
to side. Ranges from 1 to 99.
Level - The Parameter 3 knob adjusts the intensity (Depth) of the changing pan. Ranges from
0 to 99.
21