Table of Contents
Advertisement
TONE Row
STATUS
KNOB
BUTTON
The TONE row is where the amp tone controls are located for Channel 1 or Channel 2. The sound
that you hear while adjusting these parameters will depend on the channel status (see chart below).
TONE control row parameters are Channel, Amp Gain, Bass, Midrange,Treble, and Amp Level.
STATUS BUTTON
Selects one of the four channel states in the following order:
-The status button LED lights green and the five control knobs light green indicating that
you are listening to Channel 1 and the control knobs affect Channel 1's tone settings.
-The status button LED lights yellow and the five control knobs light green indicating that
you are listening to a warped sound and the control knobs affect Channel 1's tone
settings.
-The status button LED lights red and the five control knobs light red indicating that you
you are listening to Channel 2 and the control knobs affect Channel 2's tone settings.
-The status button LED lights yellow and the five control knobs light red indicating that
you are listening to a warped sound and the control knobs affect Channel 2's tone
settings.
KNOB 1
Controls the amount of Amp Gain.The Amp Gain range is from
KNOB 2
Controls the Bass EQ Level (boost/cut). The Bass EQ Level range is from -12dB (
KNOB 3
Controls the Midrange EQ Level (boost/cut). The Midrange EQ Level range is from -12dB (
12dB (
).
KNOB 4
Selects the Treble EQ Level (boots/cut). The Treble EQ Level range is from -12dB (
KNOB 5
Controls the Amp Level. The Amp Level Range is from
TONE ROW
KNOB
KNOB
KNOB
1
2
3
GNX4 Matrix Functions
KNOB
5
4
to
to
.
.
) to 12dB (
) to
) to 12dB (
).
).
29
Advertisement
Table of Contents
