Midi Functions; Midi Channel - DigiTech Whammy DT Owner's Manual

MIDI Functions

The Whammy DT features a MIDI input for receiving incoming MIDI data. MIDI messages can
select a Whammy or Drop Tune effect and set whether these effects are in an active or bypassed
state. MIDI CC messages can then be used to control the Whammy Expression Pedal position.

MIDI Channel

The Whammy DT can receive MIDI messages on any, or all MIDI channels. The following steps
outline the procedure for accessing or changing the MIDI channel:
1. Disconnect the power from the Whammy pedal.
2. Press and hold the
of the
WHAMMY Effect LEDs
channel.
3. Using the reference chart below, rotate the
MIDI channel.
4. Press the
WHAMMY Effect Footswitch
Page 10
WHAMMY Effect Footswitch
will begin to flash indicating the currently selected MIDI
while reconnecting the power. One
WHAMMY Effect Knob
again to exit the MIDI set up menu.
to select the desired