Changing Phone Settings; Customizing Rings And Message Indicators - Cisco 7965G Manual

Changing Phone Settings

You can personalize your Cisco Unified IP Phone by adjusting the ring tone, background image, and
other settings.

Customizing Rings and Message Indicators

You can customize how your phone indicates an incoming call and a new voice mail message. You can
also adjust the ringer volume for your phone.
If you want to...
Change the ring tone per
line
Change the ring pattern per
line (flash-only, ring once,
beep-only, etc.)
Adjust the volume level for
the phone ringer
Change the way that the
voice message light on your
handset works
56
Then...
1. Choose > User Preferences > Rings.
2. Choose a phone line or the default ring setting.
3. Choose a ring tone to play a sample of it.
4. Press Select and Save to set the ring tone, or press Cancel.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Access your call ring pattern settings. (See
Settings on the Web, page
Before you can access this setting, your system administrator might
Note
need to enable it for you.
Press while the handset is in the cradle and the headset
and speakerphone buttons are off. The new ringer volume is saved
automatically.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Access your message indicator settings. (See
Settings on the Web, page
Note Typically, the default system policy is to indicate a new voice
message by displaying a steady light on the handset light strip.
Accessing Your User
65.)
Controlling Line
72.)
Accessing Your User
65.)
Controlling Line
72.)
OL-19612-01