Command Syntax; Command Usage; Figure 431 Valid Commands; Table 260 Valid Commands - ZyXEL Communications ZYWALL 35 User Manual

Chapter 48 System Maintenance Menus 8 to 10

48.1.1 Command Syntax

The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
The required fields in a command are enclosed in angle brackets <>.
The optional fields in a command are enclosed in square brackets [].
The |symbol means "or".
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or off.

48.1.2 Command Usage

A list of commands can be found by typing help or ? at the command prompt. Always type
the full command. Type exit to return to the SMT main menu when finished.

Figure 431 Valid Commands

Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys
ether
config
bm
certificates
ras>
The following table describes some commands in this screen.

Table 260 Valid Commands

COMMAND
sys
ls
exit
device
ether
poe
pptp
aux
config
ip
ipsec
bridge
682
ls
poe
ip
idp
8021x
DESCRIPTION
The system commands display device information and configure device settings.
The load sharing commands allow you to configure load balancing.
This command returns you to the SMT main menu.
The device commands deal with the dial backup connection.
These commands display Ethernet information and configure Ethernet settings.
These commands deal with PPPoE connections.
These commands deal with PPTP connections.
These commands display dial backup information and control dial backup connections.
These commands configure firewall and anti-spam settings.
These commands display IP information and configure IP settings.
These commands display IPSec information and configure IPSec settings.
These commands display bridge information.
exit device
pptp aux
ipsec bridge
av as
radius
ZyWALL 5/35/70 Series User's Guide