Figure 332 Menu 4: Internet Access Setup (Ethernet); Table 228 Menu 4: Internet Access Setup (Ethernet) - ZyXEL Communications ZYWALL 35 User Manual

Chapter 36 Internet Access

Figure 332 Menu 4: Internet Access Setup (Ethernet)

The following table describes the fields in this menu.

Table 228 Menu 4: Internet Access Setup (Ethernet)

FIELD
ISP's Name
Encapsulation
Service Type
Note: DSL users must choose the Standard option only. The My Login, My
Password and Login Server fields are not applicable in this case.
My Login
My Password
Retype to
Confirm
Login Server
Relogin Every
(min)
IP Address
Assignment
IP Address
IP Subnet Mask
582
Menu 4 - Internet Access Setup
ISP's Name= WAN_1
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)=
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This is the descriptive name of your ISP for identification purposes.
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for the IP Address field.
Press [SPACE BAR] and then [ENTER] to select Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner Manager
authentication method), RR-Telstra or Telia Login. Choose a RoadRunner flavor if
your ISP is Time Warner's RoadRunner; otherwise choose Standard.
Enter the login name given to you by your ISP.
Type your password again for confirmation.
Enter your password again to make sure that you have entered is correctly.
The ZyWALL will find the RoadRunner Server IP if this field is left blank. If it does
not, then you must enter the authentication server IP address.
This field is available when you select Telia Login in the Service Type field.
The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.
Type the number of minutes from 1 to 59 (30 recommended) for the ZyWALL to wait
between logins.
If your ISP did not assign you a fixed IP address, press [SPACE BAR] and then
[ENTER] to select Dynamic, otherwise select Static and enter the IP address and
subnet mask in the following fields.
Enter the (fixed) IP address assigned to you by your ISP (static IP address
assignment is selected in the previous field).
Enter the subnet mask associated with your static IP.
N/A
ZyWALL 5/35/70 Series User's Guide