Accessing The Smt Via Telnet; Navigating The Smt Interface; Figure 69 Login Screen; Table 43 Main Menu Commands - ZyXEL Communications ZyAIR G-5100 User Manual

12.3 Accessing the SMT via Telnet

The following procedure details how to telnet into your ZyAIR.
1 In Windows, click Start (usually in the bottom left corner), Run and then type "telnet
192.168.1.2" (the default IP address) and click OK.
2 For your first login, enter the default password "1234". As you type the password, the
screen displays an asterisk "*" for each character you type.

Figure 69 Login Screen

3 After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period)
after you log in, your ZyAIR will automatically log you out. You will then have to telnet into
the ZyAIR again. You can use the web configurator or the CI commands to change the
inactivity time out period.

12.4 Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your
ZyAIR.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 43 Main Menu Commands

OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a "hidden"
menu
Move the cursor
Entering information Type in or press
Chapter 12 Introducing the SMT
Password : xxxx
KEYSTROKE DESCRIPTION
[ENTER] To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
[ESC] Press [ESC] to move back to the previous menu.
Press [SPACE BAR] Fields beginning with "Edit" lead to hidden menus and
to change No to Yes have a default setting of No. Press [SPACE BAR] once to
then press [ENTER]. change No to Yes, then press [ENTER] to go to the
"hidden" menu.
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field.
[DOWN] arrow keys. You can also use the [UP]/[DOWN] arrow keys to move to
the previous and the next field, respectively.
When you are at the top of a menu, press the [UP] arrow
key to move to the bottom of a menu.
You need to fill in two types of fields. The first requires you
[SPACE BAR], then to type in the appropriate information. The second allows
press [ENTER]. you to cycle through the available choices by pressing
[SPACE BAR].
ZyAIR G-5100 User's Guide
133