F/W Upload Screen; Figure 10-6 Firmware Upload; Table 10-6 Firmware Upload - ZyXEL Communications ZyAir Access Point Series User Manual

10.5 F/W Upload Screen

Find firmware at www.zyxel.com
extension, e.g., "zyair.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to
two minutes. After a successful upload, the system will reboot. See the Firmware and Configuration File
Maintenance chapter for upgrading firmware using FTP/TFTP commands.
Click MAINTENANCE and then F/W Upload. Follow the instructions in this screen to upload firmware to
your ZyAIR.
The following table describes the labels in this screen.
LABEL
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
Do not turn off the ZyAIR while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into the ZyAIR
again.
Maintenance
in a file that (usually) uses the system model name with a "*.bin"

Figure 10-6 Firmware Upload

Table 10-6 Firmware Upload

DESCRIPTION
ZyAIR Access Point Series User's Guide
10-7