Table of Contents
Advertisement
FIELD
Max. Frame
Enable Maximum Frame Burst to help eliminate collisions in mixed-mode
Burst
networks (networks with both IEEE 802.11g and IEEE 802.11b traffic) and
enhance the performance of both pure IEEE 802.11g and mixed IEEE
802.11b/g networks. Maximum Frame Burst sets the maximum time, in
micro-seconds, that the ZyAIR transmits IEEE 802.11g wireless traffic only.
Type the maximum frame burst between 0 and 1800 (650, 1000 or 1800
recommended). Enter 0 to disable this feature.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
13.3.1 Configuring MAC Address Filter
Your ZyAIR checks the MAC address of the wireless station device against a list of allowed or denied
MAC addresses. However, intruders could fake allowed MAC addresses so MAC-based authentication is
less secure than EAP authentication.
Follow the steps below to create the MAC address table on your ZyAIR.
Step 1.
From the main menu, enter 3 to open Menu 3 – LAN Setup.
Step 2.
Enter 5 to display Menu 3.5 – Wireless LAN Setup.
LAN Setup
Table 13-2 Menu 3.5 Wireless LAN Setup
DESCRIPTION
ZyAIR G-500 Wireless Access Point User's Guide
EXMAPLE
650
13-5
Advertisement
Table of Contents
