D Memory Keyer Screen - Icom IC-7800 Instruction Manual

4
RECEIVE AND TRANSMIT
D D Memory keyer screen
[TRANSMIT] [CW]
• Memory keyer screen
[EXIT/SET] [F-1•M1]–[F-5•–1]
Pre-set characters can be sent using the keyer send
menu. Contents of the memory keyer are set using the
edit menu.
• Transmitting
q During CW mode operation, push [F-3•KEYER] to
select memory keyer screen.
w Push [TRANSMIT] to set the transceiver to trans-
mit, or set the break-in function ON (p. 6-3).
e Push one of the function keys ([F-1•M1] to [F-4•M4])
to send the contents of the memory keyer.
• Pushing a function key for 1 sec. repeatedly sends the
contents; push any function key to cancel the transmis-
sion.
• The contest serial number counter is incremented each
time the contents are sent.
• Push [F-5•–1] to reduce the contest serial number count
by 1 when resending contents to unanswered calls.
For your information
When an external keypad is connected to [EXT
KEYPAD] connector on the rear panel, the pro-
grammed contents, M1—M4, can be transmitted
without selecting the memory keyer screen.
See p. 2-6 for details.
r Push [EXIT/SET] twice to return to normal screen.
4-8