Icom IC-7800 Instruction Manual page 153

12
SET MODE
I ACC set mode
Selects the transceiver's reference signal condition
from IN, OFF and OUT.
Adjusts the internal reference signal frequency within
0 to 100% range in 1% steps during frequency cali-
bration. (default: 50%)
(continued)
• IN : Use an external reference signal for the IC-
7800.
• OFF : Not input/output the reference signal.
(default)
• OUT : Outputs the IC-7800 reference signal to ex-
ternally connected equipment(s) for their ref-
erence.
NOTE: If the applied reference signal is off-fre-
quency, or no signal is applied with "IN" selection,
the IC-7800 will not work properly. Select "OFF" or
"OUT" then reboot the IC-7800 in such case.
12-10