D Mini Scope Screen Indication; D Scope Set Mode - Icom IC-7800 Instruction Manual

5
FUNCTIONS FOR RECEIVE
D D Mini scope screen indication
D D Scope set mode
[F-3•Ω ≈] [F-7•WIDE]
[F-1•Y] [F-2•Z][F-4•DEF]
Turn the transmitting signal waveform indication ON
and OFF.
[M.SCOPE]
[EXIT/SET] Main dial
The mini scope screen can be displayed with another
screen display, such as set mode menu, decoder
screen, memory list screen, etc. simultaneously.
q Set the scope mode (center or fix), marker, attenu-
ator, span, etc. in advance. (pgs. 5-2, 5-3)
w Push [M.SCOPE] to toggle the mini scope indica-
tion ON and OFF.
• The S/RF meter type during mini scope indication can
be selected in display set mode (Meter Type (Wide
Screen) item). (p. 12-11)
This set mode is used to set the waveform color,
sweeping speed, scope range for fix mode, etc.
q During spectrum scope display ON, push
[F-7•SET] to select scope set mode screen.
• Push [F-7•WIDE] to toggle the screen size between nor-
mal and wide.
w Push [F-1•Y] or [F-2•Z] to select the desired set
item.
e Set the desired condition using the main dial.
• Push [F-4•DEF] for 1 sec. to select the default condition
or value.
• Push [F-3•Ω ≈] to select the set contents for some
items.
r Push [EXIT/SET] to exit from set mode.
NOTE: The transmitting signal waveform indica-
tion is available for the center mode only.
5-4