I Vox Function; D Using The Vox Function; D Adjusting The Vox Function; D Vox Set Mode - Icom IC-7800 Instruction Manual

6
FUNCTIONS FOR TRANSMIT

I VOX function

D D Using the VOX function
[VOX/BK-IN]
[SSB] [AM/FM]
D D Adjusting the VOX function
[VOX/BK-IN] [SSB] [AM/FM]
[VOX GAIN] [ANTI VOX]
D D VOX set mode
Set the VOX delay for a convenient interval before re-
turning to receive within 0 to 2.0 sec. range.
Set the VOX voice delay to prevent mis-transmission
of your voice when switching to transmit.
Short, Mid., Long and OFF settings are available.
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your voice.
This function provides "hands-free" operation.
q Select a phone mode (SSB, AM, FM).
w Push [VOX/BK-IN] to turn the VOX function ON or
OFF.
• "VOX" appears while the VOX is in use.
• [VOX/BK-IN] indicator above this switch lights green.
q Select a phone mode (SSB, AM, FM).
w Push [VOX/BK-IN] to turn VOX function ON.
e While speaking into the microphone with your nor-
mal voice level, rotate [VOX GAIN] to the point
where the transceiver is continuously transmitting.
r During receive, rotate [ANTI VOX] to the point
where the transceiver does not switch to transmit
due to received audio from the speaker.
t Adjust the VOX delay and the VOX voice delay in
VOX set mode, if necessary.
q Push [VOX/BK-IN] for 1 sec. to enter VOX set
mode.
w Select the desired item using [F-1•Y] or [F-2•Z].
e Rotate the main dial to the desired set value or con-
dition.
• Push [F-4•DEF] for 1 sec. to select a default value.
r Push [EXIT/SET] to exit VOX set mode.
When using the VOX voice delay, turn the TX mon-
itor function OFF, the transmitted audio will be
echoed.
6-2