Icom IC-7800 Instruction Manual page 89

D D Scope set mode (continued)
Set the scope edge frequencies for fix mode scope
when 8 to 11 MHz band is selected.
Set the scope edge frequencies for fix mode scope
when 11 to 15 MHz band is selected.
Set the scope edge frequencies for fix mode scope
when 15 to 20 MHz band is selected.
Set the scope edge frequencies for fix mode scope
when 20 to 22 MHz band is selected.
Set the scope edge frequencies for fix mode scope
when 22 to 26 MHz band is selected.
FUNCTIONS FOR RECEIVE
• Set the frequencies within 8.000 to 11.000 MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so
either edge frequency will be set to the differ-
ence between higher and lower frequencies
become 5 to 500 kHz automatically while setting
another edge frequency.
• Set the frequencies within 11.000 to 15.000 MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so
either edge frequency will be set to the differ-
ence between higher and lower frequencies
become 5 to 500 kHz automatically while setting
another edge frequency.
• Set the frequencies within 15.000 to 20.000 MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so
either edge frequency will be set to the differ-
ence between higher and lower frequencies
become 5 to 500 kHz automatically while setting
another edge frequency.
• Set the frequencies within 20.000 to 22.000 MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so
either edge frequency will be set to the differ-
ence between higher and lower frequencies
become 5 to 500 kHz automatically while setting
another edge frequency.
• Set the frequencies within 22.000 to 26.000 MHz
range in 1 kHz steps.
Up to 500 kHz band width can be specified, so
either edge frequency will be set to the differ-
ence between higher and lower frequencies
become 5 to 500 kHz automatically while setting
another edge frequency.
5-7
5