D Psk Memory Transmission; D Automatic Transmission/Reception Setting - Icom IC-7800 Instruction Manual

4
RECEIVE AND TRANSMIT
D D PSK memory transmission
[F-1•PT1]–[F-4•PT4]
[F-1•PT5]–[F-4•PT8]
D D Automatic transmission/reception setting
[F-6•AUTO TX]
[EXIT/SET] [F-7•1–4/5–8]
[EXIT/SET] [F-7•PT1..PT8]
Pre-set characters can be sent using the PSK memo-
ry. Contents of the memory are set using the edit
menu.
q During PSK mode operation, push [F-3•DECODE]
to select PSK decode screen.
w Push [F-4•TX MEM] to select PSK memory screen.
e Push [F-7•1–4/5–8] to select memory bank then
push one of the function keys ([F-1•PT1] to
[F-4•PT4] or [F-1•PT5] to [F-4•PT8]).
• When no keyboard is connected, the selected memory
contents will be transmitted immediately.
• When a keyboard is connected, the memory contents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected key-
board is pressed, depending on auto transmission/re-
ception setting (see below).
• The transmission date, time, reception date and/or time
may be displayed in RX contents screen, depending on
setting.
q During PSK mode operation, push [F-3•DECODE]
to select PSK decode screen.
w Push [F-4•TX MEM] to select PSK memory screen,
then push [F-6•EDIT] to select PSK memory edit
screen.
• PSK memory contents of Channel 1 (PT1) is selected.
e Push [F-7•PT1..PT8] several times to select the de-
sired RTTY memory.
r Push [F-6•AUTO TX] several times to select the de-
sired condition, as follows.
• AUTO TX/RX : Automatically transmits the se-
• AUTO TX
• AUTO RX
• No indication : Press [F12] on the keyboard to
t Push [EXIT/SET] to return to exit from PSK mem-
ory edit condition.
NOTE: The transceiver always functions as the
"AUTO TX/RX" setting when no keyboard is con-
nected.
4-24
lected memory and returns to re-
ceive after the transmission.
: Automatically transmits the se-
lected memory. To return to re-
ceive, press [F12] on the key-
board.
: Press [F12] on the keyboard to
transmit the selected memory. Au-
tomatically returns to receive after
the transmission.
transmit the selected memory and
press [F12] again to return to re-
ceive.