Icom IC-7800 Instruction Manual page 167

12
SET MODE
D D Load option set mode
Selects file loading condition from All and Select.
(default: Select)
Selects the antenna memory setting loading condition
YES and NO. (default: NO).
Selects the reference signal setting loading condition
YES and NO. (default: NO).
Selects the IP address and subnet mask setting load-
ing condition YES and NO. (default: NO).
Selects the CI-V address setting loading condition
YES and NO. (default: NO).
Selects memory channel contents and other settings
loading condition YES and NO. (default: YES).
Selects the voice TX memory loading condition YES
and NO. (default: YES).
Selects the voice RX memory loading condition YES
and NO. (default: NO).
• All : Loads and sets the all following contents.
• Select : Loads and sets the selected contents only.
• YES : Loads and sets the antenna memory.
• NO : Use the original antenna memory setting.
• YES : Loads and sets the reference signal setting.
• NO : Use the original reference signal setting.
• YES : Loads and sets the IP address and subnet
mask setting.
• NO : Use the original IP address and subnet
mask setting.
• YES : Loads and sets the CI-V address setting.
• NO : Use the original CI-V address setting.
• YES : Loads and sets memory channel contents
and other settings.
• NO : Use the original memory channel contents
and other settings.
• YES : Loads and sets the voice TX memory.
• NO : Use the original the voice TX memory.
• YES : Loads and sets the voice RX memory.
• NO : Use the original the voice RX memory.
12-24