D Editing A Memory Keyer - Icom IC-7800 Instruction Manual

D D Editing a memory keyer
[123]/[Symbol] [ABC] [F-3•DEL] [F-4•SPACE]
[F-1•Ω] [F-2•≈]
• Memory keyer edit screen
• Example— entered "QSL TU DE JA3YUA TEST"
into memory keyer channel 3
• Pre-programmed contents
CH
M1 CQ TEST CQ TEST DE ICOM ICOM TEST
M2 UR 5NN✱ BK
M3 CFM TU
M4 QRZ?
[EXIT/SET] [F-7•M1..M4]
Contents
RECEIVE AND TRANSMIT
The contents of the memory keyer memories can be
set using the memory keyer edit menu. The memory
keyer can memorize and re-transmit 4 CW key codes
for often-used CW sentences, contest serial numbers,
etc. Total capacity of the memory keyer is 70 charac-
ters per memory channel.
• Programming contents
q During CW mode operation, push [F-3•KEYER] to
select memory keyer screen.
w Push [EXIT•SET] to select memory keyer menu,
then push [F-2•EDIT] to select keyer edit screen.
• Memory keyer contents of Channel 1 (M1) is selected.
e Push [F-7•M1..M4] several times to select the de-
sired memory keyer channel to be edited.
r Push [ABC] or [123] or [Symbol] to select the char-
acter group, then rotate the main dial to select the
character, or push the keypad for number input.
• [Symbol] appears when [123] is pushed when "123"
character group is selected.
• Selectable characters (using the main dial);
Key selection
NOTE:
" " is used to transmit a following word with no
^
space such as
such as ^AR, and the string "
space.
✱
" " is used to insert the CW contest serial num-
ber. The serial number automatically increments
by 1. This function is only available for one mem-
ory keyer channel at a time. Memory keyer chan-
nel M2 used "
✔ For your convenience
When a PC keyboard is connected to [KEYBOARD]
connector on the rear panel, the memory keyer con-
tents can also be edited from the keyboard.
t Push [F-1•Ω] or [F-2•≈] to move the cursor back-
wards or forwards, respectively.
• Pushing [F-3•DEL] deletes a character and [F-4•SPACE]
inserts a space.
y Repeat steps r and t to input the desired charac-
ters.
u Push [EXIT/SET] twice to return normal screen.
4-9
Editable characters
A to Z (capital letters)
0 to 9 (numbers)
/ ? ^ . , @ ✱
. Put " " before a text string
^
AR
" is sent with no
AR
✱
" by default.
4