I Recording A Message For Transmit; D Recording; D Confirming A Message For Transmit - Icom IC-7800 Instruction Manual

7
VOICE RECORDER FUNCTIONS

I Recording a message for transmit

D D Recording
[F-1•Y] [F-2•Z] [F-4•REC]
Appears
D D Confirming a message for transmit
[F-1•Y] [F-2•Z] [F-3•PLAY]
Adjust [MIC] control so that this
indicator reads within 100%.
To transmit a message using the voice recorder, record
the desired message in advance as described below.
The IC-7800 has digital voice memories for transmis-
sion, up to 4 channels and the total message length of
up to 99 sec. can be recorded.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-2•VOICE] to call up the voice recorder
screen.
e Push [EXIT/SET] to select voice recorder menu.
r Push [F-2•MIC REC] to select the voice mic. record
screen.
t Push [F-1•Y] or [F-2•Z] to select the desired mem-
ory channel.
y Push [F-4•REC] for 1 sec. to start recording.
• " " indicator appears.
• Speak into the microphone without pushing [PTT].
• Previously recorded contents are cleared.
• Audio output from the internal speaker is automatically
muted.
u While speaking into the microphone with your nor-
mal voice level, adjust the [MIC] control so that the
[MIC-REC LEVEL] indicator reads within 100%.
i Push [F-4•REC] momentarily to stop recording.
• The recording is terminated automatically when the re-
maining time becomes 0 sec.
o Push [EXIT/SET] twice to exit the voice recorder
screen.
q Perform the steps q to r as "D Recording" above.
w Push [F-1•Y] or [F-2•Z] to select the desired mem-
ory channel.
e Push [F-3•PLAY] to playback the recorded contents.
• " " indicator appears.
r Push [F-3•PLAY] again to stop playback.
• Playback is terminated automatically when all of the
recorded contents in the channel are played.
t Push [EXIT/SET] twice to exit the voice recorder
screen.
7-6