D Rtty Memory Transmission; D Automatic Transmission/Reception Setting - Icom IC-7800 Instruction Manual

4
RECEIVE AND TRANSMIT
D D RTTY memory transmission
[F-1•RT1]–[F-4•RT4]
[F-1•RT5]–[F-4•RT8]
D D Automatic transmission/reception setting
[F-6•AUTO TX]
[EXIT/SET] [F-7•1–4/5–8]
[EXIT/SET] [F-7•RT1..RT8]
Pre-set characters can be sent using the RTTY mem-
ory. Contents of the memory are set using the edit
menu.
q During RTTY mode operation, push [F-3•DECODE]
to select RTTY decode screen.
w Push [F-4•TX MEM] to select RTTY memory
screen.
e Push [F-7•1–4/5–8] to select memory bank then
push one of the function keys ([F-1•RT1] to
[F-4•RT4] or [F-1•RT5] to [F-4•RT8]).
• When no keyboard is connected, the selected memory
contents will be transmitted immediately.
• When a keyboard is connected, the memory contents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected key-
board is pressed, depending on auto transmission/re-
ception setting (see below).
• The transmission date, time, reception date and/or time
may be displayed in RX contents screen, depending on
setting.
q During RTTY mode operation, push [F-3•DECODE]
to select RTTY decode screen.
w Push [F-4•TX MEM] to select RTTY memory
screen, then push [F-6•EDIT] to select RTTY mem-
ory edit screen.
RTTY m
• emory contents of the Channel 1 (RT1) is se-
lected.
e Push [F-7•RT1..RT8] several times to select the de-
sired RTTY memory.
r Push [F-6•AUTO TX] several times to select the de-
sired condition as follow.
• AUTO TX/RX : Automatically transmits the se-
• AUTO TX
• AUTO RX
• No indication : Press [F12] on the keyboard to
t Push [EXIT/SET] to exit RTTY memory edit condi-
tion.
NOTE: The transceiver always functions as the
"AUTO TX/RX" setting when no keyboard is con-
nected.
4-16
lected memory and returns to re-
ceive after the transmission.
: Automatically transmits the se-
lected memory. To return to re-
ceive, press [F12] on the key-
board.
: Press [F12] on the keyboard to
transmit the selected memory. Au-
tomatically returns to receive after
the transmission.
transmit the selected memory and
press [F12] again to return to re-
ceive.