D Ip Address Setting - Icom IC-7800 Instruction Manual

D D IP address setting
[F-3•Ω ≈]
[F-1•Y] [F-2•Z]
[F-7•SET]
[F-5•OTHERS] [EXIT/SET]
UPDATING THE FIRMWARE
When updating the firmware from the CF memory
card, the following settings are not necessary.
IMPORTANT!: A fixed (static) IP address is used for
the IC-7800.
When you connect the IC-7800 to a LAN, ask the
network manager about a usable/assignable IP
address and the subnet mask in advance.
NEVER set the IP address that has already been
used with another device in the network. If the IP
address is duplicated, the network will crash down.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [F-7•SET] to select set mode menu screen.
e Push [F-5•OTHERS] to select miscellaneous (oth-
ers) set mode.
r Push [F-1•Y]/[F-2•Z] several times to select "IP Ad-
dress" item.
t Push [F-3•Ω ≈] to select the desired part then ro-
tate main dial to set the desired or specified IP ad-
dress.
• "192.168.0.1" is the default setting.
y Push [F-2•Z] to select "Subnet Mask" item.
u Rotate main dial to set the desired or specified sub-
net mask.
• "255.255.255.0" is the default setting.
i Push [POWER] to turn the transceiver power OFF,
then ON to effect the IP address and subnet mask
settings.
16-7
16