I Memory Channels; I Memory Channel Selection; D Using The Keypad - Icom IC-7800 Instruction Manual

8
MEMORY OPERATION

I Memory channels

MEMORY
CHANNEL
Regular memory
channels
Scan edge
memory
channels

I Memory channel selection

D D Using the [Y Y ]/[Z Z ] keys
D D Using the keypad
MEMORY
CHANNEL
NUMBER
One frequency and one mode
1–99
in each memory channel.
One frequency and one mode in
P1, P2 each memory channel as scan
edges for programmed scan.
[Y] [Z] [V/M]
Keypad
[Y] [Z] [V/M] [F-INP•
The transceiver has 101 memory channels. Memory
mode is very useful for quickly changing to often-used
frequencies.
All 101 memory channels are tunable which means the
programmed frequency can be tuned temporarily with
the main dial, etc. in memory mode.
CAPABILITY
q Push [V/M] to select memory mode.
w Push [Y]/[Z] several times to select the desired
memory channel.
• Push and hold [Y]/[Z] for continuous selection.
• [UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [V/M] again.
q Push [V/M] to select memory mode.
w Push [F-INP•
e Push the desired memory channel number using the
keypad.
• Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r Push [Y] or [Z] to select the desired memory chan-
nel.
[EXAMPLE]
]
ENT
To select the memory channel 3;
- Push [F-INP•
To select the memory channel 12;
- Push [F-INP•
[Z].
To select the scan edge channel P1;
- Push [F-INP•
[Y] or [Z].
To select the scan edge channel P2;
- Push [F-INP•
[Y] or [Z].
8-2
TRANSFER OVER-
TO VFO WRITING
Yes Yes
Yes Yes
].
ENT
], [7•3], then push [Y] or [Z].
ENT
], [1.8•1], [3.5•2], then push [Y] or
ENT
], [1.8•1], [50•0], [50•0], then push
ENT
], [1.8•1], [50•0], [1.8•1], then push
ENT
CLEAR
Yes
No