I Display Set Mode - Icom IC-7800 Instruction Manual

I Display set mode

Adjusts the LCD unit brightness from 0 (dark) to 100%
(bright) range in 1% steps. (default: 50%)
Adjusts the switch indicators brightness from 1 (dark)
to 100 (bright) range in 1 steps. (default: 80)
Selects the desired display type from A, B and C.
(default: A)
Selects the desired font for frequency readout from
Italic (1), Italic (2), Italic (3), Italic (4), Round (1),
Round (2), Round (3), Shadow (1), Shadow (2),
Shadow (3), Qubic (1), Qubic (2), Qubic (3), Qubic
(4), IC-780 (1), IC-780 (2), IC-780 (3) and IC-780 (4).
(default: Italic (1))
Selects the desired font for the displays other than fre-
quency readout from Normal and Slim.
(default: Normal)
Set meter needle response from SLOW, MID and
FAST. (default: MID)
Selects the desired S/RF meter type during normal
screen indication from Standard, Edgewise and Bar.
(default: Standard)
Selects the desired S/RF meter type during wide
screen or mini scope indication from Edgewise and
Bar. (default: Edgewise)
Turns the meter peak hold function ON and OFF.
(default: ON)
This function is used for the bar meter only.
This setting is effective for the standard and edge-
wise meter type selections only.
12-11
12
SET MODE