I Memory Scan Operation; I Select Memory Scan Operation - Icom IC-7800 Instruction Manual

9
SCANS

I Memory scan operation

[SQL] for main [F-1•MEMO] [EXIT/SET]

I Select memory scan operation

[F-3•SELECT] [F-5•SEL No.]
[SQL] for main [F-1•MEMO]
Main dial
[EXIT/SET] Main dial
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Select memory mode.
e Push [F-5•SCAN] to select the scan screen.
r Set the main band's [SQL] open or closed.
• See page 9-2 for squelch condition.
t Push [F-1•MEMO] to start the memory scan.
• "
ning.
y When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
ting and the squelch condition.
u To cancel the scan, push [F-1•MEMO].
• Rotating the main dial also cancels the scan.
2 or more memory channels must be programmed
for memory scan to start.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Select memory mode.
e Push [F-5•SCAN] to select the scan screen.
r Set the main band's [SQL] open or closed.
• See page 9-2 for squelch condition.
t Push [F-5•SEL No.] several times to select the se-
lect scan number from #1, #2, #3 and #1/#2/#3.
y Push [F-1•MEMO] to start the memory scan.
• "
ning.
u Push [F-3•SELECT] to start select memory scan;
push [F-3•SELECT] again to return to memory scan,
if desired.
• "
"
i When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
ting and the squelch condition.
o To cancel the scan, push [F-1•MEMO].
• Rotating the main dial also cancels the scan.
2 or more memory channels must be designated as
select memory channels, as well as the same select
scan number, for select memory scan to start.
9-6
" and decimal points blink while scan-
" and decimal points blink while scan-
" blinks instead
" during select memory scan.
of