Recording A Message For Transmit; D Recording; D Confirming A Message For Transmit - Icom IC-7600 Instruction Manual

■ Recording a message for transmit

To transmit a message using the voice recorder,
record the desired message in advance as described
below.
The IC-7600 has digital voice memories for
transmission, up to 4 messages and a total message
length of up to 99 seconds can be recorded.

D Recording

q Push [EXIT/SET] several times to close any multi-
function screens, if necessary.
w Push [VOICE] (F-2) to call up the voice recorder
screen.
e Push [EXIT/SET] to select voice recorder menu.
r Push [MIC REC] (F-2) to select the voice mic.
record screen.
t Push [Y] (F-1) or [Z] (F-2) to select the desired
message.
y While speaking into the microphone with your
normal voice level, adjust the [MIC GAIN] control
so that the [MIC-REC LEVEL] indicator reads
within 100%.
u Hold down [REC] (F-4) for 1 second to start
recording.
• " " indicator appears.
• Speak into the microphone without pushing [PTT].
• Previously recorded contents are cleared.
• Audio output from the internal speaker is automatically
muted.
i Push [REC] (F-4) momentarily to stop recording.
• The recording is terminated automatically when the
remaining time becomes 0 second.
o Push [EXIT/SET] twice to exit the voice recorder
screen.

D Confirming a message for transmit

q Perform the steps q to r as "D Recording" above.
w Push [Y] (F-1) or [Z] (F-2) to select the desired
message.
e Push [PLAY] (F-3) to playback the recorded
contents.
• " " indicator appears.
• Hold down [CLR] (F-6) for 1 second to erase the
contents.
r Push [PLAY] (F-3) again to stop playback.
• Playback is terminated automatically when all of the
recorded contents in the message are played.
t Push [EXIT/SET] twice to exit the voice recorder
screen.
VOICE RECORDER FUNCTIONS
REC
F-4
F-1 F-2 EXIT/SET
VOICE
MIC REC
Appears Adjust [MIC GAIN] control so that this
indicator reads within 100%.
CLR
F-6
F-1 F-2 F-3 EXIT/SET
PLAY
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
102