Recording A Message For Transmit; D Recording; D Confirming A Message For Transmit - Icom IC-7700 Instruction Manual

7
VOICE RECORDER FUNCTIONS

■ Recording a message for transmit

D D Recording
∫ √
F-1 F-2
Appears
D D Confirming a message for transmit
∫ √
F-1 F-2
REC
F-4
Adjust [MIC] control so that this
indicator reads within 100%.
PLAY
F-3
To transmit a message using the voice recorder, record
the desired message in advance as described below.
The IC-7700 has digital voice memories for transmis-
sion, up to 4 messages and a total message length of
up to 99 sec. can be recorded.
q Push
several times to close a multi-func-
EXIT/SET
tion screen, if necessary.
w Push [VOICE]
screen.
e Push
to select voice recorder menu.
EXIT/SET
r Push [MIC REC]
record screen.
t Push [Y]
F-1
message.
y Push and hold [REC]
ing.
• " " indicator appears.
●REC
• Speak into the microphone without pushing [PTT].
• Previously recorded contents are cleared.
• Audio output from the internal speaker is automatically
muted.
u While speaking into the microphone with your nor-
mal voice level, adjust the [MIC] control so that the
[MIC-REC LEVEL] indicator reads within 100%.
i Push [REC]
F-4
• The recording is terminated automatically when the re-
maining time becomes 0 sec.
o Push
EXIT/SET
screen.
q Perform the steps q to r as "D Recording" above.
w Push [Y]
F-1
message.
e Push [PLAY]
F-3
tents.
• " " indicator appears.
≈PLAY
r Push [PLAY]
F-3
• Playback is terminated automatically when all of the
recorded contents in the message are played.
t Push
EXIT/SET
screen.
7-6
to call up the voice recorder
F-2
to select the voice mic.
F-2
or [Z] to select the desired
F-2
for 1 sec. to start record-
F-4
momentarily to stop recording.
twice to exit the voice recorder
or [Z] to select the desired
F-2
to playback the recorded con-
again to stop playback.
twice to exit the voice recorder