Recording A Message For Transmit; D Recording; D Confirming/Erasing The Recorded Message - Icom IC-7000 Instruction Manual

D
To transmit a message using a voice recorder, record
the desired message in advance as described below.
q Select S-1.
w Push [F-1 VO] then [Z(
voice root menu.
)]. The voice starting menu can be
MENU / GRP
[Z(
changed in the miscellaneous (others) Set mode. (p.
134)
e Push [F-3 MIC] to select the voice memory
recording mode.
r Push [Y( )] then rotate [DIAL] to adjust
MENU/GRP
the mic gain control so that the "REC LEVEL"
indicator reads within maximum.
[F-4 DEF] to select the default mic gain.
)] to exit the mic gain adjustment
MENU / GRP
[Z(
condition.
t Push [F-1 ≤≥] to select the desired memory
channel, then hold down [F-3 REC] for 1 second
to start recording.
y Push [F-3 REC] again (or push [Z(
stop recording.
Recording is automatically terminated when the total time
of recorded messages, T1–T4, becomes 90 seconds.
u Push [Z( )] twice to exit the voice
MENU/GRP
memory screen.
D
q Call up the voice memory recording mode as
described in steps q to e as shown above.
w Push [F-1 ≤≥] to select the desired memory
channel, then push [F-2 PLY] to start playback.
" " appears.
e Push [F-2 PLY] again to stop playback, if desired.
r Push [Z(
MENU/GRP
memory mode
)] to select the
MENU/GRP
[PTT].
[PTT].
)]) to
MENU/GRP
)] twice to exit the voice
VOICE RECORDER FUNCTIONS
[MENU/GRP] [F-1] [F-3]
q Call up the voice memory recording mode as
described in steps q to e as shown above.
w Push [F-1 ≤≥] to select the desired memory channel
to be erased, push [F-2 PLY] to start playback.
" " appears.
e Hold down [F-4 CLR] for 1 second to erase the
contents.
r Push [Z( )] twice to exit the voice
MENU/GRP
memory mode.
7
7
96