Cluster Configuration Example - 3Com 7757 Configuration Manual

714 C 63: C
HAPTER LUSTER
Cluster Configuration
Example
Cluster Configuration
Example
Table 578 Display and maintain cluster configurations
Operation
Clear the NDP statistics on a
port
Network requirements
Three switches form a cluster, in which:
The management device is a Switch 7750.
■
The rest are member devices.
■
The Switch 7750 manages the rest two member devices as the management
device. The detailed information about the cluster is as follows.
The two member devices are connected to Ethernet1/0/2 and Ethernet1/0/3
■
ports of the management device.
The management device is connected to the external network through its
■
Ethernet1/0/1 port.
Ethernet1/0/1 port of the management device belongs to VLAN1, whose
■
interface IP address is 163.172.55.1.
All the devices in the cluster use the same FTP server and TFTP server.
■
The FTP server and TFTP server share one IP address: 163.172.55.2.
■
The SNMP site and log host share one IP address: 69.172.55.4.
■
Network diagram
Figure 184 Network diagram for Switch Clustering cluster configuration
FTP/TFTP Server
63.172.55.1
Management device
Eth 1 /0/3
Eth1 /1
Member Device
MAC:000f.e201 .0011
Command
reset ndp statistics [ interface
port-list ]
Internet
SNMP/logging host(NMS)
Eth 1/0 /1
69 .172 .55 .4
VLAN 2 interface
163.172 .55 .1
Eth 1/0/2
Eth1/1
Member Device
MAC:000f.e201.0012
Description
-