Network Diagram; Configuration Procedure - 3Com 7757 Configuration Manual

146 C 17: IPX C
HAPTER ONFIGURATION

Network diagram

Figure 40 IPX network diagram
Vlan -int1
1000.000f-e20 f-0000
Switch A
Vlan -int2
2 .000 f-e 20f-0000
Server

Configuration procedure

1 Configure Switch A.
# Enable IPX.
<Switch> system-view
[Switch] ipx enable
# Assign the network number 2 to VLAN interface 2 to enable IPX on the VLAN
interface.
[Switch] interface Vlan-interface 2
[Switch-Vlan-interface2] ipx network 2
# Set the packet encapsulation format to Ethernet_II on VLAN interface 2.
[Switch-Vlan-interface2] ipx encapsulation ethernet-2
[Switch-Vlan-interface2] quit
# Assign the network number 1000 to VLAN interface 1 to enable IPX on the
VLAN interface.
[Switch] interface Vlan-interface 1
[Switch-Vlan-interface1] ipx network 1000
# Configure a static route with the destination network number 3.
[Switch-Vlan-interface1] quit
[Switch] ipx route-static 3 1000.000f-e20f-0001 tick 7 hop 2
2 Configure Switch B.
# Enable IPX.
[Switch] ipx enable
IPX
Vlan- int1
1000 .000 f-e 20f-0001
Switch B
Vlan-int2
3 .000 f-e 20f-0001
Client