3Com 7757 Configuration Manual page 45

Console Port Login Configuration with Authentication Mode Being Password 45
Network diagram
Figure 6 Network diagram for AUX user interface configuration (with the authentication
mode being password)
RS-232 Console port
Configuration cable
PC Switch
Configuration procedure
# Enter system view.
<SW7750> system-view
# Enter AUX user interface view.
[SW7750] user-interface aux 0
# Specify to authenticate users logging in through the Console port using the local
password.
[SW7750-ui-aux0] authentication-mode password
# Set the local password to 123456 (in plain text).
[SW7750-ui-aux0] set authentication password simple 123456
# Specify commands of level 2 are available to users logging into the AUX user
interface.
[SW7750-ui-aux0] user privilege level 2
# Set the baud rate of the Console port to 19,200 bps.
[SW7750-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[SW7750-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store
to 20.
[SW7750-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[SW7750-ui-aux0] idle-timeout 6