3Com 7757 Configuration Manual page 880

880 C 81: R
HAPTER EMOTE
- C
PING ONFIGURATION
Table 696 Configure an FTP test on a remote-ping client
Operation
Configure the source IP
address
Configure the source port
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Configure the type of FTP
operation
Configure an FTP login
username
Configure an FTP login
password
Configure a file name for the
FTP operation
Start the test
Display test results
4 Configuring an HTTP test on a remote-ping client
Table 697 Configure an HTTP test on a remote-ping client
Operation
Enter system view
Command
source-ip ip-address
source-port port-number
count times
history-records number
frequency interval
timeout time
tos value
ftp-operation { get | put }
username name
password password
filename file-name
test-enable
display remote-ping results
[ admin-name operation-tag ]
Command
system-view
Description
Required
By default, no source IP
address is configured.
Optional
By default, no source port is
configured.
Optional
By default, each test makes
one probe.
Figure 232 Optional
By default, the maximum
number is 50.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Optional
By default, a probe times out
in three seconds.
Optional
By default, the service type is
zero.
Optional
By default, the type of FTP
operation is get, that is, the
FTP operation will get a file
from the FTP server.
Required
By default, neither username
nor password is configured.
Required
By default, no file name is
configured for the FTP
operation
Required
Required
You can execute the
command in any view.
Description
-