Displaying Acl Configuration - 3Com 7757 Configuration Manual

652 C 60: ACL C
HAPTER
Configuration Example
Displaying ACL
Configuration
ONFIGURATION
Table 526 Parameters description of ACL combinations
Parameter
ip-group { acl-numbe
r | acl-name }
link-group { acl-num
ber | acl-name }
user-group { acl-num
ber | acl-name }
rule-id
# Apply ACL 2100 in the inbound direction on Ethernet 2/0/1 to filter packets.
<SW7750> system-view
[SW7750] interface Ethernet 2/0/1
[SW7750-Ethernet2/0/1] qos
[SW7750-qoss-Ethernet2/0/1] packet-filter inbound ip-group 2100
After the above configuration, you can execute the display commands in any
view to view the ACL running information, so as to verify the configuration result.
Table 527 Display ACL configuration
Operation
Display a time range or time
ranges
Display the configured ACL
rule(s)
Display the statistics
information about the
configured ACL rules
Display the remain ACL
resource of a specified slot
Display the ACL mode of
traffic flows
Display the ACL rules applied
to a port
Display the matching order of
the applied ACL rules
Description
Basic and advanced ACL.
acl-number: ACL number, ranging from 2,000 to 3,999.
acl-name: ACL name, up to 32 characters long, beginning with an
English letter (a to z or A to Z) without space and quotation mark, case
insensitive.
Layer 2 ACL
acl-number: ACL number, ranging from 4,000 to 4,999.
acl-name: ACL name, up to 32 characters long, beginning with an
English letter (a to z or A to Z) without space and quotation mark, case
insensitive.
User-defined ACL
acl-number: ACL number, ranging from 5,000 to 5,999.
acl-name: ACL name, up to 32 characters long, beginning with an
English letter (a to z or A to Z) without space and quotation mark, case
insensitive.
Number of the ACL rule, ranging from 0 to 127. If this argument is
not specified, all rules in the specified ACL will be applied.
Command
display time-range { all |
time-name }
display acl config { all |
acl-number }
display acl config statistics
display acl remaining entry
slot slot-number
display acl mode
display acl
running-packet-filter { all |
interface interface-type
interface-number }
display acl order
Description
These commands can be
executed in any view.